Garage Sale Part 1 of 3

For Sale/Trade by Members

Moderators: gregg dahl, Jayne

rshuback
Posts: 63
Joined: Fri Nov 09, 2012 8:38 am
Contact:

Garage Sale Part 1 of 3

Postby rshuback » Thu Oct 24, 2013 8:36 am

I have pictures of everything listed, just let me know if interested

PLEASE EMAIL: Bob.Shuback@gmail.com Or 7two4-five54-92four2

Prices are PLUS SHIPPING

3)Dyna Coil Dc6-4 $70.00
Green Dyna Coils $60.00
Jims Evo Lifter Block $40.00
Kosman Bracket w Rear Caliper $ 150.00
8 Inch Pmfr floating Rotor(New) $150.00
Bandit Clutch Hat drilled for 3 finger Lockup $50.00
Pro Street Frame Works FXR Single Downtube Frame 32 Degree Neck (With Title)........Offers???
Kosman Fxr Frame ( With Title).......Offers????
Std Fxr Inner Primary Cover $75.00
Magura Left Hand Brake Assembly(New) $50.00
Axle Adjuster Blocks 7/8 Axle (new) $40.00
Jims crank pin 23974-873(new) $50.00
S&S 4 1/8 Bore Pistons 12-1 $75.00
S&S Bearing cages Part number 34-4020(New) $20.00
S&S standard breather valve & Shim Kit Part number 33-4250(New) $60.00
S&S Pinion shaft conversion Pkg SS Part number 33-4148(New) $75.00
S&S pinion shaft bearing assembly S&S part number 31-4018S(New) $40.00
Jims rod race set 1046-36A(New) $25.00
23 tooth sprocket Ds199497…..Have other front sprockets available also $20.00
Vrod Clutch basket $75.00
Touring/Fxr Trans case Hd34707-00(New) $125.00
1.725 Se Rocker arm set 17396-08(New) $100.00
King Sportster Tank, Great shape needs painted $75.00
Zippers pro tapers pushrods 11.5 $ 60.00
S&S Billet trap Door with Hardware kit BT speed (New) $125.00
S&S Pinion shaft bearing assembly Part Number 31-4016S(New) $30.00
High Torque primary bearing Drag# 110-0018(New) $10.00
S&S Billet Aluminum 4 3/8 Cylinders Offers???
(3) Bandit Lockups 3 an 6 finger 6 Finger SOLD
36 Tooth Bandit super clutch basket (have a few other combinations also) $350.00
Evo crane cam 310-2 Part # Ds-199275 $50.00
S&S Super D 181 W Thunderjet $300.00

Vrod Barnett Clutch part# 304-30-10015 $125.00
10inch Pmfr Rotor $50.00
640 S&S evo Cam $60.00......SOLD
Not sure if these are worth anything to any one but we have assortment of slightly used JE pistons for 4.381 bore an 4.5 bore
Specs are Bore: 4.5- Compression Height 1.444- Dome .640-Pin Diameter .927-pin length 2.950
4.381 same specs
Last edited by rshuback on Mon Jan 27, 2014 11:14 am, edited 2 times in total.
Image

rshuback
Posts: 63
Joined: Fri Nov 09, 2012 8:38 am
Contact:

Re: Garage Sale Part 1 of 3

Postby rshuback » Wed Jan 15, 2014 8:17 am

bump...
Image

rshuback
Posts: 63
Joined: Fri Nov 09, 2012 8:38 am
Contact:

Re: Garage Sale Part 1 of 3

Postby rshuback » Fri Jan 17, 2014 1:37 pm

6 finger lockup ....................SOLD
53/54 pmfr sprockets ............SOLD
Image

rshuback
Posts: 63
Joined: Fri Nov 09, 2012 8:38 am
Contact:

Re: Garage Sale Part 1 of 3

Postby rshuback » Wed Mar 12, 2014 8:05 am

Bump 2 Top..... We will be in Louisiana!!!!
Image

rshuback
Posts: 63
Joined: Fri Nov 09, 2012 8:38 am
Contact:

Re: Garage Sale Part 1 of 3

Postby rshuback » Tue Dec 02, 2014 10:38 am

Top
Image

jig
Posts: 30
Joined: Fri Sep 09, 2011 7:07 pm
Contact:

Re: Garage Sale Part 1 of 3

Postby jig » Sat Sep 26, 2015 9:12 pm

do you still have the S & S cylinders `/i had spoke to you in the past and am still interested. i'm changing my project and am ready to sell out some of the parts that i've acquired .thanks for any reply. Mike "JIG" Carpenter REDEEMED RACING

CALDWELL
Posts: 131
Joined: Sun May 13, 2012 3:41 pm
Location: KNOXVILLE, TN
Contact:

Re: Garage Sale Part 1 of 3

Postby CALDWELL » Tue Oct 20, 2015 8:01 am

I am interested in the Bandit clutch basket, it is a lightened 76T billet rear pulley with (12) drive keys?

skipitxd91
Posts: 30
Joined: Thu Apr 02, 2015 5:45 pm
Contact:

Re: Garage Sale Part 1 of 3

Postby skipitxd91 » Tue Oct 20, 2015 7:24 pm

How much for the rolling Chassis If my TC eng & trans will Drop right In?

jig
Posts: 30
Joined: Fri Sep 09, 2011 7:07 pm
Contact:

Re: Garage Sale Part 1 of 3

Postby jig » Mon Jun 05, 2017 8:32 am

are the S&S cylinders still available.what stroke and rod combo was used with them? thanks 423-923-0185


Return to “Classifieds”

Who is online

Users browsing this forum: No registered users and 1 guest