2-Step/Stutter Set-Up ???

Data gathering, EFI, other electronics Discussion

Moderators: gregg dahl, Jayne

User avatar
Blastem
Posts: 72
Joined: Mon Jan 21, 2013 9:56 am
Contact:

2-Step/Stutter Set-Up ???

Postby Blastem » Fri Feb 15, 2013 11:49 am

Question ???...If ya want to message me direct that's good too...Wanting to know what the CLEAN setup is for running a 2-step/stutter activation switch if u are using Buell 7/8 bars/levers and switches..?? Any help appreciated....tanks
"LET OUR CHILDREN RACE" !!!!!!!!!!!!!!

User avatar
admin
Site Admin
Posts: 228
Joined: Fri Jan 13, 2006 6:51 pm
Contact:

Re: 2-Step/Stutter Set-Up ???

Postby admin » Fri Feb 15, 2013 2:30 pm

Does your ignition /stutter box work from a ground signal or from a [12v] high signal, or ??
Makes a difference to how I did it..
Marty
Admin Notice

User avatar
Blastem
Posts: 72
Joined: Mon Jan 21, 2013 9:56 am
Contact:

Re: 2-Step/Stutter Set-Up ???

Postby Blastem » Fri Feb 15, 2013 10:59 pm

Thank you for responding!! The controls do have an isolated switch for this application...Thanks again!!
"LET OUR CHILDREN RACE" !!!!!!!!!!!!!!


Return to “Electronics”

Who is online

Users browsing this forum: No registered users and 1 guest